This is a Blender kit for Statocaster guitars. It will drop in to most Mexican or American Fender Strats with no modification. The Blender wiring has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you want. In the bridge position you can blend the neck pickup in as much as you want. In positions 2 and 4 you can have all three pickups on at once.

Included...

• (2) Potentiometer- CTS 250k Split Shaft w/.250" Short Bushing(Custom made to Mojo's specifications)
• (1) Potentiometer- CTS 250k Split Shaft "Blender" Pot(Custom made to Mojo's specifications)
• (1) Switch- Oak Grigsby 5-Way Switch
• (1) Jack- Switchcraft 1/4" Mono Input Jack
• (1) Capacitor- Orange Drop .047uf @ 100v
• Wire- White 22ga Stranded Cloth Covered Wire
• Wire- Black 22ga Stranded Cloth Covered Wire
• (1) Ground Tab
• (1) Wiring Diagram
• (1) Roundhead Non-Counter Sunk Screws
  * Specify if you need Oval Head.

Note: Installing these kits and assemblies on overseas made guitars may require some modification. Going from metric to standard requires you to enlarge the hole diameter to 1/2" for the Switchcraft toggle switches, 3/8" for the CTS, CGE potentiometers and Switchcraft jacks. We recommend that you use a tapered reamer or a stepped drill bit for the best results. Also the knobs and tips will have to be changed to fit USA pots and switches.

ATTENTION: Please read the Disclaimer .

Tell a Friend