This is a Standard kit for Statocaster guitars. It will drop into most Mexican or American Fender Strats with no modification.

Included...

• (3) Potentiometer- CTS 250k Split Shaft w/.250" Short Bushing(Custom made to Mojo's specifications)
• (1) Switch- Oak Grigsby 5-Way Switch
• (1) Jack- Switchcraft 1/4" Mono Input Jack
• (1) Capacitor- Orange Drop .047uf @ 100v
• Wire- White 22ga Stranded Cloth Covered Wire
• Wire- Black 22ga Stranded Cloth Covered Wire
• (1) Ground Tab
• (1) Wiring Diagram and Control Function Diagram
• (1) Roundhead Non-Counter Sunk Screws
  * Specify if you need Oval Head.
  

Note: Installing these kits and assemblies on overseas made guitars may require some modification. Going from metric to standard requires you to enlarge the hole diameter to 1/2" for the Switchcraft toggle switches, 3/8" for the CTS, CGE potentiometers and Switchcraft jacks. We recommend that you use a tapered reamer or a stepped drill bit for the best results. Also the knobs and tips will have to be changed to fit USA pots and switches.

ATTENTION: Please read the Disclaimer .

Tell a Friend