Solderless Quiet Coil Tele 3-Way Wiring Harness

This is a 3-way standard kit for our Quiet Coil Telecaster pickups that utilizes 500k potentiometers. It uses a master volume and master tone control for both pickups. Use set-screw knobs only.

Included: 

• (2) CTS 500k audio taper audio solid shaft potentiometers 
• (1) CRL 3-way switch 
• (1) Switchcraft mono input jack 
• (1) Vitamin T Oil Filled .022uf capacitor 
• (1 ft) Pre-tinned cloth covered black wire 
• (1 ft) Pre-tinned cloth covered white wire 
• (1) Volume mod cap

NOTE: Standard Tele wiring diagram included shows 250k pots and a .047uf capacitor. This harness utilizes 500k pots and a .022uf capacitor. Also the neck pickup has an extra 3rd yellow wire that gets grounded to the screw terminal on the volume pot.