Lerxst Omega Bluetooth Speaker **Limited Edition**
Alex Lifeson has teamed up with the speaker wizards at Audio Engine to create a custom B2 Home Wireless Music System. The LERXST Omega Limited Edition B2 is a premium powered speaker with high-fidelity stereo sound that connects to your music in seconds from any app or device. Wired or wireless connections, including aptX Bluetooth from your phone, tablet or computer as well as good old analog from that vintage turntable or 80’s tape deck.
To make this a truly unique product Alex enlisted the boutique guitar amp gurus at Mojotone to hand-wrap the speaker cabinet in black lacquered, vintage tweed cloth and apply the Lerxst Omega grill front in classic Moving Pictures red.
- GENERAL SPECIFICATIONS
Type
Powered Bluetooth aptX speakerAmplifier Type
Class ABPower Output
60 W peak power total (15 W RMS / 30 W peak per channel), AESDrivers
2.75” aramid fiber woofers0.75“ Silk dome tweeters
Inputs
3.5 mm stereo mini-jack, BluetoothInput Voltages
100-240 V 50/60 Hz auto-switchingSNR
>95 dB (typical A-weighted)Frequency Response
65 Hz-22 kHz ±2.0 dBAnalog Input Impedence
10K ohms unbalancedProtection
Output current limiting, thermal over-temperature, power on/off transient protectionPower Consumption
Idle: 10W - BLUETOOTH SPECIFICATIONS
Internal D/A Converter
PCM 5102Input Bit Depth
16 bitBluetooth Receiver Type
Bluetooth 5.0Supported Codecs
aptX, AAC, SBCWireless Operation Range
Up to 100 ft (30 m) typicalInput Data Rate
Determined by BluetoothWireless Latency
~30 milliseconds (ms) - WEIGHTS AND MEASURES
Dimensions (HWD)
4.25”(10.8 cm) x 12.25”(31.1 cm) x 5.50”(14 cm)Weight
6 lb (2.7 kg)Total Shipping Weight
10 lb (4.6 kg)Shipping Box Dimensions (LWH)
16” (40.6 cm) x 7.5” (19.1 cm) x 10.5” (26.7 cm) - ENVIRONMENTAL REQUIREMENTS
Operating temperature: 32 degrees F to 95 degrees F
Non-operating temperature: -4 degrees F to 113 degrees F
Relative humidity: 5% to 95% non-condensing - MATERIALS AND CONSTRUCTION
0.7″ (18 mm) thick MDF cabinets with real wood veneer
0.75″ (20 mm) silk dome tweeters with neodymium magnets
2.75″ (70 mm) aramid fiber woofers with advanced voice coils - CABINETS
To minimize unwanted resonances and distortion, Audioengine cabinets have thick high-resin MDF walls with extensive internal bracing. Heavy internal sound-damping material is also used to reduce unwanted sound reflections inside the cabinet. The B2 cabinet is a unique design in that it has dual sub-enclosures to prevent cross-interference, while each side contains its own tuned, front-port bass slot.
Ratings & Reviews
4 reviews
A Worthwhile Investment!
by HC -
The best Bluetooth speaker I’ve ever owned… and it looks great!
It rocks it rolls its Alex in a box
by Stan Lane -
Awesome....this puts out sound like a box should,well built and really tough looking. I glad I was able to get ahold of one of these. Sounds are loud and clear..many smiles