‘65 Blackface 15W P-Reverb Head Amp Kit
This kit has a lead time. Check here for more information.
Please read our article 'Mojotone Amp Kit Building Primer' along with our amp kit disclaimer located in the Specs tab before buying this kit.
The Blackface Princeton Reverb has been a staple in guitar tone since its inception in 1964. Similar to the idea behind the Vibrochamp, the Princeton Reverb was essentially all the good parts of its predecessor, the Tweed Princeton, but with a long-spring reverb and tube-driven tremolo circuit added. These amps were ideal not only for use in the studio, but for traveling and gigging with as well. Over the years the Princeton Reverb has worked its way into the gear repertoire of many renowned guitarists such as Ryan Adams, Larry Carlton, Glen Campbell, and Tommy Tedesco.
The Mojotone Princeton Reverb style amp is a 12-15 watt miniature giant that comes stock with a Jensen C10Q 10” 35 watt speaker and (2) 6V6 power tubes. Like the original Blackface era Princetons, the Mojotone amp has the added gain stage after the reverb that pushes the amp to a thicker level of saturation when the amp is pushed. This effect, mixed with the smooth compression of the 6V6 tubes and the classic tone of the Jensen speaker makes for a creamy and soulful tone with a ton of character.
The amp has one channel with two inputs. Input 1 is slightly hotter where input 2 is just a bit more mellow. The advantage here is the ability to plug in a guitar with single coils to input 1 and a guitar with humbuckers to input 2 without having to worry about making manual adjustments to the amp’s volume level when switching guitars. The control panels from left to right reads “volume, treble, bass, reverb, speed, and intensity.” This means you get all the unique tonal qualities of the classic AA1164 circuit as without having to spend hours dialing in the right sound with too many knobs. This amp is designed to give any guitarist a pure, articulate tone that is appropriate for any setting and handles a pedal chain beautifully. Just plug your guitar in and you’ll be jammin’ “Surfin’ USA” in no time.
- Class Type:AB All Tube Amplifier
- Output:~12-15 Watts
- Bias Type:Fixed
- Build Time:~5 hours
- Preamp Tubes:JJ ECC83/12AX7 (3), JJ ECC81/12AT7 (1)
- Output Tube(s):JJ 6V6S (2)
- Rectifier Tube:JJ 5AR4 / GZ34
- Transformers:Power - BF Princeton Reverb (MOJO760EX), Output - BF Princeton Reverb (MOJO772), Reverb Driver - (MOJO776)
- Cabinet:Blackface Princeton Reverb Head Cabinet
- Hardware:Princeton Reverb Small Parts Kit, Princeton Reverb Chassis, Front & Rear Faceplates, Fender style 2-button Footswitch, 4AB3C1B Reverb Tank, Black Tolex Reverb Bag, Vintage Reverb Wire Kit, 10' Install Power Cord
Disclaimer: Some of the parts contained in this kit are subject to availability.
Mojotone reserves the right to change or substitute any and all of the parts contained in this amplifier kit without advertisement or notification to the buyer. Part substitutions made by Mojotone are guaranteed not to affect the integrity or operation of your amplifier kit. Time estimates listed are from start to finish. If you are new to tube amplifiers, additional time may need to be factored.
When purchasing a kit from Mojotone, you will receive the following documentation.
2. Wiring Diagram / Layout
Our beginner level kits such as the tweed champ and tweed deluxe include a manual. If you purchase a kit from Mojotone and do not receive these documents, you can obtain copies by emailing firstname.lastname@example.org or calling 800-927-6656. The Mojotone staff is available Monday through Friday from 8:30 a.m. to 5:00 p.m. EST unless otherwise closed.
Mojotone kits include the best quality parts that are available at the time of purchase. If a substitution is required, our team will use parts that are of equal quality to ensure the integrity of the kit build remains the same.
Building a fully functional amplifier kit is not an easy task. Before building a kit, one should have the ability to properly solder as well as read and understand a schematic and wiring diagram. While we do our very best to ensure all documentation is current, the included documentation is meant to serve as an overall guide to building the amplifier. Simply following the schematic and wiring diagram does not guarantee you will have a fully functional amplifier. In fact, post build troubleshooting is a common issue across all builds.
Our staff is available to assist with basic troubleshooting needs. There are plenty of online videos available that are helpful with most post build issues. Technical staff is available via email by sending a message to email@example.com. You may also call our sales team to discuss build problems, dial 800-927-6656 and press 1 for sales.
Building a tube amplifier takes time, dedication, resources and most importantly... Skills! The experience of building an amp can come with some frustration, the reward of completing the build is definitely well worth your time. Please review the wiring diagram, schematic and manual (if applicable) prior to making your purchase. Mojotone will not accept any returns on amplifier kits and/or parts that have been assembled, soldered or modified.
Ratings & Reviews
It turned-out amazingly well
This was my first amp kit, and it turned-out amazingly well. This is a great sounding amp. The MojoTone instructions that came in the kit were very well laid-out, and the large color wiring diagram was very helpful. I built the head, and paired it up with a MojoTone Canyon 1X12 w/ a Celestion Alnico Cream. It sounds great. I spent a lot more than 5 hours putting this together, because I wanted it to turn out right since it was my first amp kit build. Wouldn't recomend this kit if you are not comfortable with your soldering skills, but it's doable if you take your time and know how to solder and use a multimeter.
The quality of the parts and the cab are great
I've never built off just a diagram and a schematic before but they were very well done and relatively easy to follow. The quality of the parts and the cab are great