Mojotone Studio One 1 Watt 2-Channel Amplifier Kit

6 Reviews
$391.04 to $595.00
SKU: G1SOK355
Weight: 19.44 lb

Check our Resources page for current build times.

On Back Order

Kit Build Difficulty: 
Easy
 
Difficult

This kit has a lead time.  Check here for more information.


Please read our article 'Mojotone Amp Kit Building Primer' along with our amp kit disclaimer located in the Specs tab before buying this kit.


Tired of playing through those kiddie practice amps that lack tone as much as they do quality? Try our Mojotone Studio One Amplifier and bring awesome tube tone to your home or studio. Equipped with a single 12BH7, two 12AX7 tubes, and a 12AY7, this tiny amp works well in the studio or mic’d up on stage. And don’t be shy to put some pedals in front of it either, because it does play nicely with them.

 

About one watt of output sounds awesome for studio or home use! This is an ideal amp for the gain of an 800 style amp at low volumes. Stock setup includes 12BH7 for running as an output tube, however you can run a 12AU7 or 12AT7 for less output volume.

 

Disclaimer: Some of the parts contained in this kit are subject to availability. Mojotone reserves the right to change or substitute any and all of the parts contained in this amplifier kit without advertisement or notification to the buyer. Part substitutions made by Mojotone are guaranteed not to affect the integrity or operation of your amplifier kit. Time estimates listed are from start to finish. If you are new to tube amplifiers, additional time may need to be factored.


  • Class Type:A All Tube Amplifier
  • Output:~1 Watts
  • Circuit:5E3 / 800
  • Bias Type:Cathode Biased
  • Build Time:~5 hours
  • Preamp Tubes:JJ ECC83/12AX7 (2), JJ 12AY7 (1)
  • Output Tube(s):TAD 12BH7 (1)
  • Rectifier Tube:None - Solid-State Rectified
  • Transformers:Power - GA-5 Power (MOJO779), Output - Wright 1580 (MOJO1580)
  • Speakers:None
  • Cabinet:Mojotone 20W Small Head Cabinet
  • Hardware:Mojotone Studio One Small Parts Kit, Mojotone Studio One Chassis, Front & Rear Faceplates, 10' Removable Power Cord

Disclaimer: Some of the parts contained in this kit are subject to availability.

Mojotone reserves the right to change or substitute any and all of the parts contained in this amplifier kit without advertisement or notification to the buyer. Part substitutions made by Mojotone are guaranteed not to affect the integrity or operation of your amplifier kit. Time estimates listed are from start to finish. If you are new to tube amplifiers, additional time may need to be factored.


When purchasing a kit from Mojotone, you will receive the following documentation.

1. Schematic

2. Wiring Diagram / Layout

Our beginner level kits such as the tweed champ and tweed deluxe include a manual. If you purchase a kit from Mojotone and do not receive these documents, you can obtain copies by emailing tech@mojotone.com or calling 800-927-6656. The Mojotone staff is available Monday through Friday from 8:30 a.m. to 5:00 p.m. EST unless otherwise closed.


Mojotone kits include the best quality parts that are available at the time of purchase. If a substitution is required, our team will use parts that are of equal quality to ensure the integrity of the kit build remains the same.


Building a fully functional amplifier kit is not an easy task. Before building a kit, one should have the ability to properly solder as well as read and understand a schematic and wiring diagram. While we do our very best to ensure all documentation is current, the included documentation is meant to serve as an overall guide to building the amplifier. Simply following the schematic and wiring diagram does not guarantee you will have a fully functional amplifier. In fact, post build troubleshooting is a common issue across all builds.


Our staff is available to assist with basic troubleshooting needs. There are plenty of online videos available that are helpful with most post build issues. Technical staff is available via email by sending a message to tech@mojotone.com. You may also call our sales team to discuss build problems, dial 800-927-6656 and press 1 for sales.


Building a tube amplifier takes time, dedication, resources and most importantly... Skills! The experience of building an amp can come with some frustration, the reward of completing the build is definitely well worth your time. Please review the wiring diagram, schematic and manual (if applicable) prior to making your purchase. Mojotone will not accept any returns on amplifier kits and/or parts that have been assembled, soldered or modified.

The following documents are included. Please feel free to view and/or download them:


Studio One Schematic
Studio One Wiring Diagram

Ratings & Reviews

6 reviews

  • 4 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews
2/17/2021 1:42 pm

This amp really sounds impressive.

by anonymous

This amp really sounds impressive. Clean channel really shines on my strat. Very sweet sounding. And the gain channel take over from there, from mild crunch up into high gain while still sounding rich and tight.

This was my first amp build, and while I wouldn't recommend to just anyone, someone with some electrical background and safety knowledge should be able to figure it out with a little research.

2/17/2021 1:42 pm

Extremely fun amp to play with an awesome range of tones!

by anonymous

Not really a kit builder, I like to do scratch builds, but the Mojo Studio 1 kit is amazing. All the parts are top-notch and the large-sized wiring diagram and schematic are nice. My kit arrived nicely packaged with everything wrapped and protected by paper and bubble wrap. I'd recommend that kit builders watch the videos and note the lead dress. I took screenshots from the videos and used the jpeg pics to get an idea how Mojo builds it out. Considering the lead channel is really high gain, it is impressive how quiet it is, even with the gain control and master cranked all the way. Extremely fun amp to play with an awesome range of tones!