Tone Coupler

(0)No Reviews yet
$6.00
SKU: T2TC1717
Sale Unit: Piece

In Stock

649 IN STOCK

Simple yet the most effective way to increase sustain and improve tone with your existing stop bar tailpiece or wraparound bridge.
Little idea that makes a Big difference! 

Did you know that raising your stop bar tailpiece and wraparound bridge posts out of their bushings causes a massive loss of energy transfer to the body? That's right, string vibration and energy gets lost through the posts threads once the collar is no longer seated tight against the bushing. That's because no matter how well the post threads are cut, the threads becomes loose and wobbly when backed out of the bushing. This causes the post to lean slightly inside of the threaded bushing under string tension, giving you poor contact throughout the threads. Think of it as a loose screw holding one end of your strings to the body! 

This is why so many players crank their tailpieces all the way down against the body to try and improve their tone. The problem with that is, you increase your chances of string breakage and premature bridge wear because the string angle off the back of your tune-o-matic is too steep. So how do you set the proper height of your stop bar or wraparound bridge and achieve optimal tone? 

Tone Coupler to the rescue! 
The Tone Coupler allows you to set the desired height of your existing tailpiece or wraparound bridge, while bridging the gap between the post and bushing for full thread contact and stability. The result is simply a much better transfer of energy and vibration through the post into the guitar body. All without having to modify or change the hardware on your guitar! 

Benefits


-Better sustain and energy transfer to the body!


-Lock in the height of your tailpiece or wraparound exactly where you need it!


-No modifications required!


-Use your existing hardware!


-Inexpensive and easy to install!


-Made in the USA!

Made from high grade tempered aircraft aluminum for the absolute best tonal qualities, without the excessive weight and mass found with other materials we tested. They are available in 6 different incremental heights allowing you to set the exact height of your existing tailpiece or wraparound bridge. Fits metric and standard posts and can be stacked for custom heights.
Sold Individually

Ratings & Reviews

No reviews available

Be the first to Write a Review