Volume Mod for Guitars
Keep more of your tone!
This is a 220K resistor in parallel with a 471pf capacitor. The capacitor acts as a "treble bleed" to preserve high end frequencies, while the resistor improves the taper when rolling back your volume potentiometer.
We use these in many of our pre-wired guitar assemblies.
These are made in house. Please contact Sales if you plan to order a large quantity as that may delay your order from being shipped.
This is a 220K resistor in parallel with a 471pf capacitor. The capacitor acts as a "treble bleed" to preserve high end frequencies, while the resistor improves the taper when rolling back your volume potentiometer.
We use these in many of our pre-wired guitar assemblies.
These are made in house. Please contact Sales if you plan to order a large quantity as that may delay your order from being shipped.
The volume mods are soldered in parallel between the first and second lugs (2 open lugs) of the volume pot.
Ratings & Reviews
8 reviews
2/17/2021 1:48 pm
Omar Najar
by anonymous -
This mod cap filter works almost perfectly within any kind of pickups configuration and, specially on humbuckers with a moderated output range.
2/17/2021 1:48 pm
Russ
by anonymous -
Not to be nitpicky but it's actually a 470pF capacitor. The '1' in '471' is the multiplier. (47 x 10).