Celestion Vintage 30 12" Speaker 8 Ohm 60W

7Reviews
$169.00
SKU: 1000028
Weight: 11 lb
Sale Unit: Piece

In Stock

2 IN STOCK

Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ‘hot-rodded’ amplifiers, Celestion set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, Celestion coupled their ‘H’ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials. 

Celestion's most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.
General Specifications
  • Nominal diameter: 12", 305mm
  • Power Rating: 60W
  • Nominal impedance: 8Ω and 16Ω
  • Sensitivity: 100dB
  • Chassis type: Pressed steel
  • Voice coil diameter: 1.75", 44.5mm
  • Voice coil material: Round copper
  • Magnet type: Ceramic
  • Magnet weight: 50oz, 1.42kg
  • Frequency range: 70-5000Hz
  • Resonance frequency, Fs: 75Hz
  • DC resistance, Re: 7.3Ω & 12.9Ω

Mounting Information
  • Diameter: 12.2", 309mm
  • Overall depth: 5.3", 135mm
  • Magnet structure diameter: 6.1", 156mm
  • Cut-out diameter: 11.1", 283mm
  • Mounting slot dimensions: 0.31", 7.9mm Ø
  • Number of mounting slots: 4
  • Mounting slot PCD: 11.7", 297mm
  • Unit weight: 10.4lb, 4.7kg

Ratings & Reviews

7 reviews

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews
7/18/2023 3:59 pm

Celestion Vintage 30s are GREAT!

by Richard -

I've had Vintage 30s in a Mojotone Bluesbreaker extension cabinet since I bought it 5 years ago. These were a complimentary upgrade from Mojotone when their "British" speakers were not available. I couldn't happier with the sound of these speakers! Clean to crunch, they deliver. So much in fact, when I recently needed to convert the cab to 4 ohms, I simply ordered 2 more Vintage 30s at 8 ohms and installed them. Even new out of the box they sound awesome, and I know will be even better as they break in. Do yourself a favor and give these a try!

2/17/2021 1:26 pm

1000028

by anonymous

What can be said that hasn't already been about the Vintage 30? I installed these in my Peavey JSX 2x12 combo (along with a total recap and fresh compliment of Mesa tubes) and could not be happier. These V-30s are what really made the difference though. If nothing makes you happier than achieving that satisfying Metal tone, then install these. And before you get rid of an amp because of lackluster sound like I almost did with a Marshall VS65R, install these first. I think you'll keep that amp around. These make that drastic of an improvement. They aren't cheap but life is too short to put up with crap sound because you want to save a buck. Save the money on something else like your spouses anniversary gift.