• Home
  • Plug and Play Jack Plate

Plug and Play Jack Plate

6Reviews
$24.99
SKU: 5455618
Weight: 0.21 lb
Sale Unit: Piece

In Stock

10 IN STOCK

The Plug and Play Jack Plate is a complete drop-in assembly for stereo speaker cabinets. The standard version shown below is marked for the 8 Ohm Stereo and 4/16 Ohm Mono. This is a common setup with guitar cabinets. What is uncommon is the elimination of the switch. This makes connecting the amplifier to the cabinet super easy
  • Interior Length        3.0 in.
  • Interior Width        3.44 in.
  • Item Length        4.03 in.
  • Item Width        4.35 in.
  • Lead Length        18 in.
  • Mounting Hole Center to Center A        3.72 in.
  • Mounting Hole Center to Center B        3.25 in.

For further information on this product, please feel free to view the datasheet here.

2/5/2024 6:08 pm

Works perfectly, just have to read the manufacturer directions

by Blake

Whoever is complaining about this jack plate needs to do a bit more research and read the attached data sheet. You can find dimensions easily online to determine if you need to modify your cab, as well as data sheets explaining how to achieve specific configurations like using either speaker individually in the cab in mono. I installed this in a MojoTone ultra-light 2x12, with a 12>10 adapter ring so I could have an Eminence Swamp thang 12" and Ragin Cajun 10" in one cab. With the Plug and play, I can run this cab and set of speakers with any and every amp I own, 4 or 16 ohm mono as needed, and isolate one speaker or the other without issue. This is a good quality product and works as advertised. The metal construction is robust, and the components feel sturdy. Exactly what I needed!

1/3/2024 6:21 pm

Instructions are under 'DOCUMENTATION' kids!

by tim

Heads UP! This multi-jack DOES cover 4ohm, 8ohm and 16ohm configurations! The instructions are here as a PDF, under 'documentation.' You just click on the link and the file downloads.

With a 2x12 cab, (2x 8 ohm speakers), the Right Jack gets you 8 ohm (1) speaker, usually the TOP of a 2x12. Left Jack gets you 4 ohm (2x 8, in Parallel) OR 1x 8 ohm, BOTTOM of a 2x12, BUT, that requires that you plug in a non-shorting jack into the Right jack. The Bottom jack gets you 16 ohms (2x 8 ohms in Series).

You can meter out the configurations BEFORE testing the cab under load.

This is a great piece of kit!