Optimized for insertion between your preamp and driver stages, this low noise, non-clipping effects loop utilizes a discrete, high voltage buffer and a return gain stage. Includes true bypass.
Installation requires 4 wires, power ground input and output.
Detailed instructions are available in the installation PDF manual
The stock setup offers a send with 10dB of cut and a return stage with 16dB of boost. The signal path can be reconfigured with panel mount pots, or trim pots (not included) or by changing component values on the board for a modified fixed installation.
The stock board has been well tested in British 45 and British 800 installations and is quiet and highly functional.
Wire is not included since you will probably want to use cloth covered wire in Fender installations and PVC coated wire in British amps. Our installations did not require the use of shielded wire.
Talk to our sales staff! 8:30-5:30pm Eastern Time 1 910 259 7291
