Broadcaster Quiet Coil Tele® Pickup
Our approach was very simple, to make a tele pickup with the exact same specs as a vintage tele pickup, without the hum.
No batteries, stacked coils, or anything else associated with other hum-canceling pickups were used in our design. The result is simply the most pure and authentic tele tone possible, with absolutely no loss of true single coil tone. They are warm and articulate, with that extra output and midrange push in the bridge position, just like the original handwound Broadcaster tele pickups.
NOTE: With all Mojotone “Quiet Coil™” pickups, you never have to worry about string spacing and radius issues, or the magnets pulling the strings out of tune, and you can bend the strings heavily without ever losing focus or sustain. All of this while achieving perfect single coil tone and absolutely no hum!
Quiet Coil Design Features:
- Consistent scatterwound coils for that handwound tone, sensitivity, and clarity.
- Vintage formulated Alnico magnet cores with lower Gauss levels like an aged vintage tele pickup.
- Vintage cloth covered leads for easy push-back soldering.
- Matched resonant peak frequency, inductance, and resistance of a vintage single coil.
- No routing modifications are required to fit shallow vintage routs like the taller stacked hum-cancelling designs.
- Less than 10 parts are used to build the Quiet Coils. Like a vintage tele pickup, they are SIMPLE!
Magnet: Alnico 5
- Output:
- Bass:
- Mids:
- Treble:
Magnet: Alnico 5
- Output:
- Bass:
- Mids:
- Treble:
Warehouse Sessions Featuring This Product
Customer Videos Featuring This Product
Ratings & Reviews
20 reviews
Andrew
by Andrew
Put the broadcaster set into a G&L ASAT to give it Alnico style mojo. Used 500 pots as recommended and love the results. I’m keeping my other ASAT with the stock ceramic pickups, because they’re great too- but too powerful a lot of the time. It will be great to have both vintage and modern sounding Teles to choose from. Huge thanks to Ozzie and David at Mojotone for helping me with a wiring issue. You guys are top in customer service!
Dave Fish
by Dave Fish
I put a set of these in a CP Thornton Classic II replacing a set of Dimarzio noiseless that I had put in replacing some lollars. I A/B'd them with a set of Harmonic Design's installed in a similar CP Thornton. There isn't much difference, perhaps 1-2% less almost imperceptible "chime" at the most. They're far superior to the Dimarzio's, especially in the middle pickup position. Nice job! Next I'll be looking at the mojo strat pickups I think.