• Home
  • Lighted Red Rocker Switch (Replacement for Marshall® Amps)

Lighted Red Rocker Switch (Replacement for Marshall® Amps)

4Reviews
$9.79
QuantityPrice
1 – 9$9.79
10 – 19$9.30
20 – 99$8.81
100 +$8.62
SKU: 4110100
Weight: 0.025 lb
Sale Unit: Piece

In Stock

264 IN STOCK

92 / 7-6-18 JMB

Lighted Red Rocker Switch replacement for Marshall® amps, JCM800, JCM900, JMP, and JCM2000 series. Switch has 5 leads in a DPST switch configuration.

5 Leads. The red (lighted) switch has one additional lug for the light. DPST switch.
  • Current Rating:20A @ 125VAC
  • Current Rating:16A @ 250VAC
  • Light:Neon Bulb
  • Made: USA
9/12/2021 5:13 pm

Does the job

by Bryan -

The switch is a good replacement for a vintage Marshall as long as you pay close attention to the mirror image from the original Arrow switch used by Marshall, and do not solder directly to the switch lugs as this will damage the switch. Use female disconnect lugs soldered to the wires, and then pushed onto the switch lugs. Works perfect.

2/17/2021 1:27 pm

they just don't make' em like they used to

by anonymous

There are a couple of problems with this part - neither of which should be attributed to Mojotone because there aren't many of these lighted rocker switches around anymore. . - The first problem is that its a bit too fragile for use in vintage style high voltage Marshall amps..DO NOT solder wire connections to this switch, soldering will destroy this switch..use only spade/speaker type connectors attached to the wire leads. The manufacturer should make this perfectly clear. Second problem is the internal lamp is much too dim..In most normal light settings its difficult to even discern if its glowing or not..they just don't make' em like they used to