Strat Flatwork Set .195''
Accurately laser cut black vulcanized fiberboard material. Top and bottom with nickel plated eyelets installed.
Top flatwork - .062" thick. Vintage spec with 2-1/16" Polepiece spread. The holes fit our .195" diameter magnets.
Bottom flatwork -.093" thick. Vintage spec with 2-1/16" Polepiece spread. The holes fit our .195" diameter magnets.
***TECH TIP*** - When we laser cut fiberboard it leaves a brown sticky residue along the edges. Use straight water and wipe it off with a sponge or paper towel.
**If you need custom sizes, please contact us for custom fiberboard pricing. We cannot accept notes asking for changes on existing stock.**
Ratings & Reviews
2 reviews
Residue comes off with a damp towel.
by Tim -
Residue is always part of Mojotone flatwork, warm water on a paper towel or cloth takes it off so it isn’t sticky and everything winds up nicely. Feel bad for the other reviewer that didn’t have this info.
Not so good this time.
by Robert L. -
Received my 15 sets of flatwork. I would always give Mojo the highest rating - but can't do it this time. All the flatwork has serious laser burn- difficult to scrape or sand off. Tons of extra work to make them useable.