Blog

Today, we continue with our British Style NC3015 Amp Kit build. After we get our ground lugs and turret board installed, we’ll begin to stuff the turret board with electronic components. We’ll prep the chassis for wiring, and then solder everything in place!

We’re diving back into amp kit building, but this time we’re doing a British Style kit: our NC3015. This is going to be a fun build that will result in an excellent-sounding amp. If you’ve been following along, this will be a great next step after our Tweed Style builds.

Mojotone has added a new kit to their store -- an amp kit based on Gibson's GA5. Today, Logan Tabor walks us through the build process and offers some basic insights on this true point-to-point assembly.

There are many things to take into consideration if you’re thinking about building one of Mojotone’s many amplifier kits. This article provides some basic terms and nomenclature, a definition of ‘amp kit difficulty,’ and a few extra things to think about!

The time has come for us to finish our Tweed Champ Kits. Today, we will test our circuits from an electrical standpoint, build our speaker wire, and install our speaker and chassis into the Tweed Champ Style Cabinet. Finally...we will rock out!

Picking up where we left off with our Tweed Champ Style Amp Kits, let’s get our eyelet boards stuffed and soldered, install the board into the chassis, and finish off our remaining solder connections!

Join in as we build a clone of the most famous amp of all time, the Tweed Champ. We will use Mojotone's latest and greatest wiring diagram and step-by-step build manual to complete the assembly!

The third and final installment of our 5E3 build is finally here! To complete our kits we will assemble the wiring harness, install the speaker, and install the chassis in the cabinet.

On this episode of Make It Monday, we dive into the build processes of a Mojotone 5E3 Tweed Deluxe Style amplifier kit. Part 1 of this 3-part series will illustrate the installation of initial hardware parts onto the chassis, as well as populating and soldering the fiberboard.